The Voltex Monaco CCT Changeable model gives you 3 light colour options in the one fitting! Use the switch on the back of the housing to select between Warm White (3000K) Natural White (Daylight 4000K) or Cool White (6000K).
It's highly energy-efficient and has no air gap into the ceiling cavity, maintaining the original building envelope integrity and preventing the loss of conditioned air.
Order in multiples of 10 to receive your lights in the Voltex 'Trade Pack', an 'easy to use, easy to dispose, minimal waste' contractor bulk pack of 10 lights - less time, less waste!
Full warranty on both the LED light and control gear for 7 years from date of purchase.
- Using only 9W, they produce a phenomenal 900-1000 lumens, depending on the light colour
- Dimmable
- 90o beam angle
- Integrated driver for easier installs and no cutting through insulation
- IC-4 (and IC-F) classification – Insulation may abut the luminiare on the sides or cover the top
- Clip-on Satin Chrome (IDL9T90-S) and Matte Black trim rings (IDL9T90-B) are also available as a cost effective designer option
- IP44 rated – ideal for use in wet areas and under soffits
Power: | 9W |
Input Voltage: | 220-240V AC 50/60Hz |
Driver: | Integrated - Dimmable (Trailing) |
Class: | IC-4 IC-F (New Zealand) |
Light Source: | Epistar™ |
Light Colour (Temperature) : | Warm White (3000K), Natural White (4000K) or Cool White (6000K) |
Lumen Output: | 900-1000 Lumens |
Rated Lifespan : | 40,000 Hours |
Beam Angle : | 90° |
IP Rating: | IP44 |
Thermal Insulation Clearance: | May abut the luminaire on the sides or cover the top (MCI & SCI = 0mm) |
Building Elements Clearance: | May abut the luminaire on the sides or the top (HCB & SCB = 0mm) |
Flange Colour : | White |
Connection : | Integrated Driver, Supply Plug & 1.2m Flexible Cord |
Ceiling Hole: | 90mm |
Dimensions : | 60mm Height x 115mm Outer Diameter |
Air Transfer Category: | Closed |
Standards Complied With : | AS/NZS 60598.2.2. (incl. NZ Amendment A) AS/NZS IEC 61347.2.13 AS/NZS CISPR 15 |
Designed to fit the following adaptor plates: IDLF140 and IDLF170