FULLY COMPATIBLE WITH VOLTEX 10YR BATTERY SMOKE ALARM (SAS115BW) AND 240V SMOKE ALARM PRODUCTS FITTED WITH A WIRELESS MODULE (SASWM) DISPLAYING THE REMOTE SYMBOL
NOTE: All 240V smoke alarms (SAS135MH) need to be fitted with a Wireless Module (SASWM) for full remote compatibility.
Smoke Alarm tests are recommended monthly. This Remote makes it easy for your customers to do those tests.
To Pair a Remote: Appoint a smoke alarm "Master" & put it into Pairing Mode. Press the NET button Once on the Remote.
Multiple Remotes can be connected to the same group of smoke alarms. They will need to be each paired to the same master smoke alarm.
(To confirm battery is good, press the 'NET' button once, and the red LED should illuminate steady for 30 seconds)Warning: The Remote contains a lithium button battery. Always ensure the battery cover is tightened securely at all times.
**Note: Transmission distance will vary depending on structural components.
Power | DC 3V (CR2450)- Replaceable |
Connectable with | SAS115BW*; SASWM* (See note below) |
Wireless Frequency | 433.42MHz |
Wireless Distance | >3 meters ** |
Temperature Range | 10~45°C |
Humidity Range | less than or equal 80% RH |
Battery Lifetime | Min 1 year |
Compliance | AS/NZS 4268 |
Standby Current | less than or equal 3uA |
Operation Current | less than or equal 30mA |
Size | 53mm(W) x 62mm(H) x16mm |
* Compatibility Note: This remote is connectable with Voltex Smoke Alarm products displaying the remote symbol.
All 240V smoke alarms (SAS135MH) need to be fitted with a Wireless Module (SASWM) for full remote compatibility.
** Note: Transmission distance will vary depending on structural components.