When a load is switched on at a push button wall switch, the timer keeps the load on for the set delay time, then turns the load off automatically when the delay time is reached
- For applications such as pantries, stairways, and storerooms
- Designed to be installed behind a wall plate (wall plate not supplied with the timer)
- Delay can be set to 5, 15 or 30 minutes (15 minutes default)
- Dimensions 39mm x 41mm x 12mm
- Works in conjunction with a momentary push-button (bell press) switch mechanism (not supplied with the timer)
- No Neutral connection required at the timer
- Maximum Load 1A, Minimum Load 2.5W
Supply | 220 – 240V, 50Hz |
Max Load | 1A (all load types) |
Min Load | 2.5W |
Compatible Load Types | Resistive loads Inductive load (contactor coil) Tungsten filament lamp load Externally ballasted lamp load (LED, CFL or Fluorescent) Self-ballasted lamp load (LEDi or CFLi) Small motor load – M.1 (exhaust fan typical) |
Timer Settings | 5 minutes 15 minutes (default) 30 minutes |
Switch Input type | Momentary push-button switch |
Load Switching type | Semiconductor switching device |
Dimensions | 39 x 41 x 12 mm |
Weight | 20g |
Ingress protection | IP30 |
Wire length | 110 mm |
Ambient Operating Temperature | 0 to 50°C |
Ambient Storage Temperature | -10 to 70°C |
Humidity | 0% to 95% RH non-condensing |
Fault Protection | Open circuit Short circuit Overload Over temperature |
Material | Flame retardant polycarbonate |