Din Rail
Easy to Read
The backlite LCD screen shows the programmed on/off times, date, day and relay status on one screen. No need to move around different screen to find out basic information.
30 Min
Block
The timer splits the 24 hours of a day up into 48-time blocks, each block is 30 minutes long. When a block is ON, the relay output is on. The timer can be set to turn any combination of the 30-minute blocks ON.
Weekly
Or
Daily
By default, the timer is set for weekly operation with the possibility to set different programs on each day of the week. There is an option to change the timer to daily operation, where the same.
Backup Battery
The timer includes a replaceable backup battery to maintain the date and time when main power is lost. The battery life is 5 years and is replaced from the back of the timer.
Power supply | 240Vac 50Hz |
Relay capacity | 16A @ 240Vac |
Loads |
Incandescent 2000 W Note: When controlling Hot Water Heaters larger than 2kW, Voltex recommends using the timer in combination with a 25A Contactor - Voltex part number MC-25-240-2NO
|
Battery life/type | 4 years/Lithium CR-1632 |
Programming resolution | 30 minutes |
Programming | Weekly (7 programs)7 different programs, one for each day of the week. Option to set ‘Daily mode’ (same program runs each day) |
Resolution of programming | 30 minutes |
Operating accuracy | ± 1 second/day at 25°C |
Operating temperature | -20 to +50°C |
Storage temperature | -10 to +70 °C |
Operating humidity | RH 20 to 90 % non-condensing |
Housing | 1 DIN module |
Protection degree | IP20 |
Quiescent Power | 1W |
Terminal size | 1 x 4mm² cable maximum |