FULLY COMPATIBLE WITH VOLTEX 10YR BATTERY SMOKE ALARM (SAS115BW) AND 240V SMOKE ALARM PRODUCTS FITTED WITH A WIRELESS MODULE (SASWM) DISPLAYING THE REMOTE SYMBOL

NOTE: All 240V smoke alarms (SAS135MH) need to be fitted with a Wireless Module (SASWM) for full remote compatibility.

Smoke Alarm tests are recommended monthly. This Remote makes it easy for your customers to do those tests.

To Pair a Remote: Appoint a smoke alarm "Master" & put it into Pairing Mode. Press the NET button Once on the Remote.

Multiple Remotes can be connected to the same group of smoke alarms. They will need to be each paired to the same master smoke alarm.

(To confirm battery is good, press the 'NET' button once, and the red LED should illuminate steady for 30 seconds)

Warning: The Remote contains a lithium button battery. Always ensure the battery cover is tightened securely at all times.

**Note: Transmission distance will vary depending on structural components.

Power	DC 3V (CR2450)- Replaceable
Connectable with	SAS115BW*; SASWM* (See note below)
Wireless Frequency	433.42MHz
Wireless Distance	>3 meters **
Temperature Range	10~45°C
Humidity Range	less than or equal 80% RH
Battery Lifetime	Min 1 year
Compliance	AS/NZS 4268
Standby Current	less than or equal 3uA
Operation Current	less than or equal 30mA
Size	53mm(W) x 62mm(H) x16mm

* Compatibility Note: This remote is connectable with Voltex Smoke Alarm products displaying the remote symbol. 

 All 240V smoke alarms (SAS135MH) need to be fitted with a Wireless Module (SASWM) for full remote compatibility.

** Note: Transmission distance will vary depending on structural components.