In-wall Delay-OFF Timer. 5m, 15m, 30m time delay. Connects to a fan or a lighting load (not both).

Description
Specifications
Download

When a load is switched on at a push button wall switch, the timer keeps the load on for the set delay time, then turns the load off automatically when the delay time is reached

For applications such as pantries, stairways, and storerooms
Designed to be installed behind a wall plate (wall plate not supplied with the timer)
Delay can be set to 5, 15 or 30 minutes (15 minutes default)
Dimensions 39mm x 41mm x 12mm
Works in conjunction with a momentary push-button (bell press) switch mechanism (not supplied with the timer)
No Neutral connection required at the timer
Maximum Load 1A, Minimum Load 2.5W

Supply	220 – 240V, 50Hz
Max Load	1A (all load types)
Min Load	2.5W
Compatible Load Types	Resistive loads Inductive load (contactor coil) Tungsten filament lamp load Externally ballasted lamp load (LED, CFL or Fluorescent) Self-ballasted lamp load (LEDi or CFLi) Small motor load – M.1 (exhaust fan typical)
Timer Settings	5 minutes 15 minutes (default) 30 minutes
Switch Input type	Momentary push-button switch
Load Switching type	Semiconductor switching device
Dimensions	39 x 41 x 12 mm
Weight	20g
Ingress protection	IP30
Wire length	110 mm
Ambient Operating Temperature	0 to 50°C
Ambient Storage Temperature	-10 to 70°C
Humidity	0% to 95% RH non-condensing
Fault Protection	Open circuit Short circuit Overload Over temperature
Material	Flame retardant polycarbonate