![DM250X](images/spacer.gif)
![section 1 image 1](https://voltexelectrical.com.au/skins/skin_3/sitebanner/product_desc/DM250x/section-1-img-1.png)
The NEW dimmer gives a quick and simple 'wire up and forget' installation. It requires an external switch mech to operate. The blue indicator LED's provide a visual indication that the dimmer is on, it has maximum and minimum dimming positions and provides a smooth experience for the user when dimming up or down.
Externally switched
2-wire dimmer
The dimmer requires an external switch mech to operate. No Neutral connection is required at the dimmer.
![](https://voltexelectrical.com.au/skins/skin_3/sitebanner/product_desc/DM250x/section-2-img-1.png)
High and Low hard Stops
The dimmer knob has a physical stop position, so the user knows when they are at minimum and maximum dimming positions.
Smooth Dimming
The dimmer provides a smooth experience for the user when dimming up and down.
![section-3-img-1](https://voltexelectrical.com.au/skins/skin_3/sitebanner/product_desc/DM250x/section-3-img-1.png)
No Setup Functions
Quick and simple 'wire up and forget' installation.
Mechanical adjustment for minimum dimming level
Some LED lights flicker at low dimming levels. A mechanical stop is therefore included to enable a minimum dimming level to be set.
![](https://voltexelectrical.com.au/skins/skin_3/sitebanner/product_desc/DM250x/section-4-img-1.png)
Led Backlight
When the dimmer is on, blue LED's provide a visual indication that the dimmer is on.
![section-5-img-1](https://voltexelectrical.com.au/skins/skin_3/sitebanner/product_desc/DM250x/section-5-img-1.png)
Supplied with both white and matte black knobs.
![Designed in Australia](https://voltexelectrical.com.au/skins/skin_3/sitebanner/product_desc/DM250x/designed-in-australia.png)
Technical Specifications:
Operating Voltage | 230 Vac 50 Hz |
Ambient Temperature Range | 0-50° C |
Maximum Load | 250W |
Minimum Load | 2W |
Switching | Requires an extra switch for on/off operation |
Compatible loads | See table below |
Non-compatible loads | See table below |
Dimmer Protection | Thermal Overload protection (conduction angle wind-back) Over Current (short circuit) protection (resettable) Over Voltage protection (resettable) |
Certified Standards | AS/NZS 60669.2.1, CISPR15 |
Load Compatibility:
Load Type | Load Symbol | Maximum Load |
---|---|---|
Dimmable LED downlights / Lamps1 | 250W | |
Incandescent / 240V Halogen Lamps | 250W | |
Low Voltage Halogen (Dichroic) Lighting with Electronic Transformers2 | 250W | |
Low Voltage Halogen (Dichroic) Lighting with Electronic Transformers2 | 250W | |
Dimmable Compact Flourescent Lamps3 | 150W | |
Motors / Fans | Not Compatible | |
Non-dimmable Flourescent / Compact Flourescent Lamps | Not Compatible |
- Different brands of dimmable LED lamps/drivers have different dimming capabilities. The DM250X dimmer has been designed to adapt to a wide range of dimmable LED lamps/drivers. However Voltex cannot guarantee compatibility with all LED lamps/drivers marketed as being compatible with trailing edge dimmers.
- Compatible with Atco & Clipsal transformers when loaded to at least 75% of their rated output.
- Refer to lamp manufacturer's guidelines.